Step-by-step service, repair, and how-to videos for 2018+ Gold Wing models.
This video series covers repair and maintenance for the 2018+ Honda Gold Wing. It currently includes 59 videos covering routine service work, body panel removal, wheels and tires, brakes, fluids, suspension, trunk components, electrical procedures, air filter access, and more involved jobs such as front shock removal and replacement, with additional procedures expected to be added over time. Practical tips and tricks are included throughout to help riders understand hidden fasteners, tight access areas, wiring, clips, panel alignment, and reassembly before starting the work.
Here are the videos included in the set, grouped by category.
1:22
In this video, I introduce the 2018+ Honda Gold Wing maintenance series and explain what I will be covering. I talk about the purpose of the videos, the kind of repair and maintenance work included, and how the series is intended to help owners understand what is involved before working on their bike.
7:02
In this video, I show you how to program a new key fob for a Honda Gold Wing. I cover the DLC connector, shorting connector, ignition sequence, button presses, and how to confirm the new fob is registered. I also include practical tips for following the timing of the procedure and avoiding confusion during the programming steps.
7:44
In this video, I show you how to read and clear stored fault codes from the ECM on a Honda Gold Wing. I cover accessing the DLC connector, using a shorting connector, reading the malfunction indicator light blink codes, interpreting long and short blinks, clearing codes, and confirming the codes are erased. I also include practical tips for handling the connector and understanding the blink sequence.
5:03
In this video, I show you how to initialize the DCT transmission clutches on a Honda Gold Wing. I cover when this procedure may help, including odd shifting, dash indicators, clutch wear, or an oil change that affects shift feel. I also walk through the button sequence and startup process, with practical tips for making sure the engine oil is hot enough before beginning.
10:46
In this video, I show you how I lift and support a 2018+ Honda Gold Wing for service work. I cover jack placement, center stand use, balance points, and how to get the motorcycle stable enough for maintenance tasks like wheel or suspension work. I also include practical tips for keeping the bike secure and avoiding damage while raising it.
19:23
In this video, I show you how to change the oil on a 2018+ Honda Gold Wing DCT. I cover the DCT-specific details, including the three drain bolts, engine oil filter, transmission filter, oil refill amount, and a few tips and tricks to help the job go smoothly.
33:43
In this video, I show you how to flush and bleed the brake fluid on a 2018+ Honda Gold Wing. I cover the front and rear brake circuits, bleeder sequence, reservoir handling, fresh DOT 4 fluid, hose setup, and checking the brake lever and pedal afterward. I also include practical tips and tricks for working alone, keeping the hose secure, protecting the paint, and avoiding air in the system.
22:20
In this video, I show you how to change the coolant on a 2018+ Honda Gold Wing. I cover the panel removal needed for access, draining both cylinder heads, emptying the coolant reservoir, refilling through the radiator, using the left-side purge hose, burping the system, and checking the reservoir after heat cycles. I also include practical tips and tricks for filling slowly, purging trapped air, and avoiding messes.
7:13
In this video, I show you how to change the rear drive fluid on a Honda Gold Wing. I cover the drain and fill plugs, draining the old fluid, refilling with the correct amount, and reinstalling the plugs. I also include practical tips for keeping the job clean and making the refill process easier.
14:20
In this video, I show you how to change and bleed the clutch fluid on a manual transmission Honda Gold Wing. I cover access to the clutch slave cylinder, the clutch reservoir, DOT 4 fluid replacement, bleeding the system, reinstalling the cover, and servicing the clutch lever pivot. I also include practical tips for protecting the paint, cleaning the reservoir gasket, and keeping the lever operating smoothly.
6:29
In this short video, I show you a practical tip for filling the rear drive fluid on a Honda Gold Wing. I cover the access challenge around the fill opening and a simple way to make adding the fluid cleaner and easier. This is a focused tip intended to help avoid spills and frustration during rear drive service.
12:09
In this video, I show you how to remove and reinstall the rear wheel on a Honda Gold Wing. I cover supporting the motorcycle, removing the muffler cover as needed, accessing the wheel fasteners, removing the rear wheel, and reinstalling it correctly. I also include practical tips for handling the wheel safely and checking everything before riding.
25:03
In this video, I show you how I change the rear tire on a Honda Gold Wing. I cover removing the rear wheel, breaking the bead, removing and installing the tire, seating the bead, balancing considerations, and reinstalling the wheel. I also include practical tips and tricks for working with the large rear tire and avoiding damage to the wheel.
2:45
In this short video, I show you a practical tip for removing the front tire from a Honda Gold Wing. I cover the clearance issue that can make the tire difficult to get out and the simple positioning trick that makes removal easier. This is a focused tip meant to help the front wheel or tire removal process go more smoothly.
18:39
In this video, I show you how to remove and reinstall the front wheel on a 2018+ Honda Gold Wing. I cover lifting and supporting the motorcycle, removing the front fender, calipers, axle pinch bolts, axle, wheel, spacers, and reinstalling everything in the correct order. I also include practical tips and tricks for protecting brake parts, handling the ABS sensor area, and checking the brakes afterward.
28:11
In this video, I show you how to replace the front brake pads on a 2018+ Honda Gold Wing. I cover removing both front calipers, cleaning the pistons, retracting the pads, installing the new pads, torquing the caliper bolts, managing brake fluid in the reservoirs, and checking lever and pedal feel. I also include practical tips for protecting the paint, watching pad wear, and avoiding damage while pushing the pistons back.
18:48
In this video, I show you how to service the rear brake on a Honda Gold Wing. I cover removing the rear brake components, inspecting and replacing pads, cleaning the caliper area, managing the brake fluid, and putting everything back together. I also include practical tips for handling the linked braking system, checking pad wear, and making sure the brake pedal feels firm afterward.
33:43
In this video, I show you how to flush and bleed the brake fluid on a 2018+ Honda Gold Wing. I cover the front and rear brake circuits, bleeder sequence, reservoir handling, fresh DOT 4 fluid, hose setup, and checking the brake lever and pedal afterward. I also include practical tips and tricks for working alone, keeping the hose secure, protecting the paint, and avoiding air in the system.
9:43
In this video, I show you how to adjust the parking brake on a Honda Gold Wing. I cover accessing the parking brake mechanism, checking the lever operation, making the adjustment, and confirming the brake holds and releases properly. I also include practical tips for getting the adjustment right without over-tightening it.
18:19
In this video, I show you how to remove and reinstall the seat on a 2018+ Honda Gold Wing. I cover the seat bolts, heated seat connector, passenger backrest area, and how the seat hooks and aligns with the frame. I also include practical tips and tricks for disconnecting the wiring and getting the seat seated correctly during reinstallation.
31:21
In this video, I show you how to remove the side cowl on a 2018+ Honda Gold Wing. I cover mirror removal, the related front and lower panels, hidden push pins, fasteners, panel clips, and the order needed to get the side cowl off cleanly. I also include practical tips and tricks for finding hidden fasteners and avoiding broken plastic tabs.
19:38
In this video, I show you how to remove the top shelter on a 2018+ Honda Gold Wing. I cover the prerequisite side panels, mirrors, meter visor area, fuel door area, hidden fasteners, connectors, and the steps needed to lift the shelter off the motorcycle. I also include practical tips for finding hidden clips and keeping the bodywork organized during removal.
27:38
In this video, I show you how to reinstall the top shelter and side cowls on a 2018+ Honda Gold Wing. I cover the panel order, clips, screws, connectors, mirrors, and alignment points needed to put the front bodywork back together. I also include practical tips and tricks for routing wires, checking panel gaps, and making sure the hidden tabs are seated properly.
5:41
In this video, I show you how to remove and reinstall the rear half of the front fender on a Honda Gold Wing. I cover the fender fasteners, how the rear section fits around the front wheel area, and the steps needed to remove it without disturbing more parts than necessary. I also include practical tips for getting the fender aligned and secured during reinstallation.
6:45
In this video, I show you how to remove and reinstall the windshield on a Honda Gold Wing. I cover the garnish pieces, windshield fasteners, mounting points, and how to lift the windshield off and set it back in place. I also include practical tips for protecting the windshield and getting the hardware lined up during reinstallation.
8:47
In this video, I show you how to remove and reinstall the windshield garnish on a Honda Gold Wing. I cover the trim pieces, screws, clips, and how the garnish fits around the windshield area. I also include practical tips for releasing the plastic tabs without breaking them and getting the garnish seated correctly during reassembly.
17:15
In this video, I show you how to remove and reinstall the meter visor panel on a Honda Gold Wing. I cover the screws, plastic push pins, hidden clips, electrical connectors, and how the panel slides and lifts out of place. I also include practical tips for releasing the connectors and getting the panel seated properly during reassembly.
8:23
In this video, I show you how to remove and reinstall the lower headlight cowl on a Honda Gold Wing. I cover the fasteners, clips, surrounding panel fitment, and how the cowl releases from the front bodywork. I also include practical tips for avoiding broken tabs and getting the panel aligned correctly when it goes back on.
25:09
In this video, I show you how to remove and reinstall the trunk panels on a Honda Gold Wing. I cover the passenger grab rails, side panels, speaker covers, push pins, screws, and how the panels slide and clip into place. I also include practical tips for finding hidden fasteners, releasing tabs, and getting the trunk panels aligned during reassembly.
12:19
In this video, I show you how to remove and reinstall the trunk lid on a Honda Gold Wing. I cover the passenger backrest, heated seat connector, hinge screws, lid harness, and how to lift the trunk lid off and set it back on correctly. I also include practical tips for supporting the lid, keeping the hinge hardware organized, and reconnecting the wiring.
5:22
In this video, I show you how to remove and reinstall the rear center cowl between the saddlebags on a Honda Gold Wing. I cover the fasteners, clips, and how the panel fits into the surrounding rear bodywork. I also include practical tips for releasing the panel cleanly and getting the tabs lined up during reassembly.
6:57
In this video, I show you how to remove and reinstall the upper saddlebag cover on a Honda Gold Wing. I cover the screws, clips, panel alignment, and how the upper cover fits with the surrounding saddlebag panels. I also include practical tips for avoiding broken tabs and keeping the panel gaps clean when it goes back together.
4:15
In this video, I show you how to remove and reinstall the rear saddlebag cover on a Honda Gold Wing. I cover the fasteners, clips, panel fitment, and how the cover releases from the surrounding saddlebag bodywork. I also include practical tips for avoiding broken tabs and getting the cover seated correctly when it goes back on.
17:42
In this video, I show you how to remove the right saddlebag from a Honda Gold Wing. I cover the surrounding panels, mounting hardware, electrical connectors, latch cables, and the steps needed to get the saddlebag free from the bike. I also include practical tips for keeping track of hardware and avoiding damage to the bodywork.
11:08
In this video, I show you how to remove and reinstall the headlight assembly on a Honda Gold Wing. I cover the surrounding panels, mounting bolts, electrical connectors, alignment points, and the steps needed to get the headlight out and back in place. I also include practical tips for handling the tight spaces and keeping the bodywork lined up during reassembly.
20:32
In this video, I show you how to reinstall the right saddlebag on a Honda Gold Wing. I cover positioning the saddlebag, reconnecting wiring and latch components, aligning the mounting points, reinstalling hardware, and checking panel fitment. I also include practical tips and tricks for routing wires and getting the bag seated cleanly without forcing it.
11:49
In this video, I show you how to remove and reinstall the trunk assembly on a Honda Gold Wing. I cover the related trim panels, mounting bolts, electrical connectors, harness routing, and how to lift the trunk off and set it back in place. I also include practical tips for keeping the wiring organized and making sure the trunk is properly aligned during reinstallation.
7:19
In this video, I show you how to remove and reinstall the front speaker covers on a Honda Gold Wing. I cover the fasteners, hidden clips, panel movement, and how the speaker cover fits into the surrounding bodywork. I also include practical tips for releasing the plastic tabs without breaking them and getting the cover seated cleanly during reassembly.
5:59
In this video, I show you how to remove and reinstall the inner shelter panel on a Honda Gold Wing. I cover the fasteners, clips, connector handling, and how the panel fits into the surrounding top shelter area. I also include practical tips for releasing the plastic tabs and getting the panel aligned without forcing it.
9:46
In this video, I show you how to replace the instrument panel lens on a Honda Gold Wing. I cover removing the meter visor and instrument panel pieces, separating the lens, handling the screws and clips, and reinstalling the new lens. I also include practical tips for protecting the panel, avoiding broken tabs, and keeping dust and fingerprints out during reassembly.
10:55
In this video, I show you how to install accessory buttons in the Honda Gold Wing switch panel. I cover removing the switch panel, opening the panel, installing the buttons, routing the wiring, and putting the panel back together. I also include practical tips for handling the small screws, clips, and connectors without damaging the switch panel.
18:25
In this video, I show you how to remove and reinstall the lower front cowls, fog light covers, lower engine cover, and engine side covers on a Honda Gold Wing. I cover the fasteners, hidden clips, panel order, and the differences between the bolts used in each location. I also include practical tips and tricks for keeping hardware organized and avoiding broken plastic tabs.
12:56
In this video, I show you a shortcut for removing the switch panel on a Honda Gold Wing without taking apart more bodywork than necessary. I cover the fasteners, panel movement, connectors, and the access points that make the shortcut work. I also include practical tips and tricks for releasing the panel carefully and getting it reinstalled cleanly.
14:16
In this video, I show you how to disassemble a Honda Gold Wing mirror assembly. I cover removing the mirror from the bike, separating the cover pieces, handling the turn signal wiring, and understanding how the clips and tabs fit together. I also include practical tips for working carefully around the plastic parts and avoiding broken clips.
45:49
In this video, I begin the valve check and adjustment process on a 2018+ Honda Gold Wing. I cover the major disassembly needed to reach the engine, including body panels, side cowls, lower covers, and other access-related parts. I also include practical tips and tricks for organizing hardware, protecting the bike, and working methodically through the teardown.
39:20
In this video, I continue the valve check and adjustment process by getting deeper into the engine access work. I cover removing additional components, exposing the valve covers, managing wiring and hoses, and preparing the engine for measurement. I also include practical tips for keeping parts organized and avoiding mistakes during this involved service.
43:52
In this video, I show the valve clearance inspection and adjustment portion of the 2018+ Honda Gold Wing valve service. I cover positioning the engine, checking clearances, recording measurements, removing cams as needed, changing shims, and rechecking the results. I also include practical tips and tricks for staying organized and working carefully through the measurement process.
32:53
In this video, I finish the valve check and adjustment job by reassembling the motorcycle after the valve service is complete. I cover reinstalling the valve covers and related engine components, routing hoses and wiring, replacing the removed panels, and checking the work as it goes back together. I also include practical tips for avoiding missed connectors and making sure the bike is ready to run.
27:15
In this video, I show you how to replace the spark plugs on a 2018+ Honda Gold Wing. I cover the panel removal needed for access, coil removal, plug access on both sides of the engine, installing the new plugs, and reassembling the bike. I also include practical tips for working in the tight spaces, handling the coils, and avoiding crossed threads.
21:53
In this video, I show you how to remove and replace the rear shock on a 2018+ Honda Gold Wing. I cover the panel and component removal needed for access, shock mounting bolts, actuator or wiring considerations, and reassembly. I also include practical tips for supporting the bike, handling tight fasteners, and getting the new shock back into position.
16:29
In this video, I show you how to service the rear shock preload actuator on a Honda Gold Wing. I cover accessing the actuator, checking its operation, adding fluid, bleeding air from the actuator, and reinstalling the parts. I also include practical tips and tricks for improving preload response and making sure the system works correctly afterward.
34:55
In this video, I show you how to remove and replace the front shock absorber on a 2018+ Honda Gold Wing. I cover the prerequisite panel removal, upper and lower shock bolts, brake line brackets, suspension arm bolts, shock wiring, and reassembly with the suspension lightly loaded. I also include practical tips and tricks for accessing tight fasteners, supporting the front end, and keeping the hardware orientation straight.
14:56
In this video, I show you how to adjust a loose front fork bearing on a 2018+ Honda Gold Wing. I cover removing the tie rods and steering yoke, accessing the bearing adjuster, setting the bearing by feel, checking for play, reinstalling the lock ring, and aligning the steering before final torque. I also include practical tips and tricks for using alignment pins and keeping the steering centered.
45:23
In this video, I show you how to change the air filter on a 2018+ Honda Gold Wing by removing and reinstalling the glove box assembly. I cover the instrument panel, left air deflector, glove box, airbox lid, filter replacement, drain hose, wiring clips, fuel filler pieces, and reassembly. I also include practical tips and tricks for handling the hidden clips, routing wires, and getting the panels lined back up.
18:04
In this video, I show you how to remove and reinstall the gas tank on a 2018+ Honda Gold Wing. I cover the fuel filler area, tank mounting hardware, fuel lines, electrical connections, vent and drain hoses, and how to lift the tank out and set it back in place. I also include practical tips for hose routing, connector handling, and making sure everything is reconnected correctly.
28:14
In this video, I show you how to remove and reinstall the ECM on a 2018+ Honda Gold Wing without removing the entire top shelter. I cover the mirror, side cowl, partial top shelter release, ECM connectors, rubber strap, and reassembly. I also include practical tips and tricks for using shortcuts, protecting dropped fasteners, and getting the panels lined up correctly afterward.
21:58
In this video, I show you how to remove and reinstall the airbag module on a Honda Gold Wing airbag model so you can access the air filter. I cover the airbag mounting bolts, cable clips, relay box, airbag connector, and the key differences from working on a non-airbag bike. I also include practical tips for releasing and reinstalling the clips and getting the module back in place correctly.
35:58
In this video, I show you how to install the Honda HomeLink accessory on a 2018+ Honda Gold Wing. I cover the switch panel work, wiring harness, control module, panel removal, connector routing, and reassembly. I also include practical tips and tricks for working around the body panels, handling the connectors, and getting the accessory wiring installed cleanly.
55:41
In this video, I show you how to retrofit the newer larger Honda Gold Wing trunk onto an earlier 2018+ bike. I cover the trunk parts, mounting changes, wiring, sub-harnesses, lighting, panel removal, trunk installation, and reassembly. I also include practical tips and tricks for dealing with the differences between the older and newer trunk setups and getting the retrofit installed cleanly.
1:01:58
In this video, I show you how to install the Honda trunk rack on the larger 2021+ Gold Wing trunk. I cover the rack installation along with the LED brake light, interior trunk light, sub-harness, lift supports, wiring, panel removal, and reassembly. I also include practical tips and tricks to help with routing wires, handling rubber parts, and getting the panels and hardware back together cleanly.